KCT HSS-CO8 2 FLUTE BALL NOSE END MILLS - INCH
KCT HSS-CO8 2 FLUTE BALL NOSE END MILLS – INCH
| d mm | d1 mm | L2 | L1 |
| 1/8 | 3/8 | 3/8 | 2.5/16 |
| 3/16 | 3/8 | 1/2 | 2.3/8 |
| 1/4 | 1/4 | 5/8 | 2.7/16 |
| 5/16 | 3/8 | 3/4 | 2.1/2 |
| 3/8 | 3/8 | 3/4 | 2.1/2 |
| 7/16 | 1/2 | 1″ | 3″ |
| 1/2 | 1/2 | 1″ | 3″ |
| 9/16 | 1/2 | 1.1/8 | 3.1/8 |
| 5/8 | 5/8 | 1.3/8 | 3.1/2 |
| 3/4 | 3/4 | 1.5/8 | 3.7/8 |
| 7/8 | 7/8 | 2″ | 4.1/4 |
| 1″ | 1″ | 2.1/4 | 4.3/4 |
| 1.1/8 | 1″ | 2.1/4 | 4.3/4 |
| 1.1/4 | 1.1/4 | 2.1/2 | 5″ |
| 1.3/8 | 1.1/4 | 2.1/2 | 5″ |
| 1.1/2 | 1.1/4 | 2.1/2 | 5″ |
| 1.5/8 | 1.1/4 | 2.1/2 | 5″ |
| 1.3/4 | 1.1/4 | 2.1/2 | 5″ |
| 1.7/8 | 1.1/4 | 2.1/2 | 5″ |
| 2″ | 1.1/4 | 2.1/2 | 5″ |
KCT HSS-CO8 Ball Nose End mills are made from premium German Raw Material. Cobalt 8% Provides better wear resistance, higher hot hardness and toughness than high speed steel (HSS) end mills. There is very little chipping or microchipping under severe cutting conditions, allowing the tool to run 10% faster than HSS, resulting in excellent metal removal rates and good finishes. KCT HSS-CO8 Ball Nose End mills is a cost-effective solution. KCT HSS-CO8 Ball Nose End mills featuring a full radius, are ideally suited for milling 3-D contoured parts. The full radius, or ball shape, permits good accuracy contouring and profiling
- 8% Cobalt, fully CNC precision ground
- Available in 2 Flute
- Regular length in Inches diameter
- Full Radius, Bright Finish
- High quality- low cost tooling
- For machining carbon steel, alloy steels, tool steels, aluminium and aluminium alloys
- Materials up to HRc35