KCT HSS-CO8 4FL ROUGHING END MILLS - BRIGHT
KCT HSS-CO8 4FL ROUGHING END MILLS – BRIGHT
| d mm | d1 mm | L1 | L2 |
| 6 | 8 | 15 | 60 |
| 7 | 10 | 20 | 65 |
| 8 | 10 | 20 | 65 |
| 9 | 12 | 25 | 75 |
| 10 | 12 | 25 | 75 |
| 11 | 12 | 30 | 80 |
| 12 | 12 | 30 | 80 |
| 13 | 16 | 35 | 90 |
| 14 | 16 | 35 | 90 |
| 15 | 16 | 40 | 95 |
| 16 | 16 | 40 | 95 |
| 17 | 20 | 40 | 105 |
| 18 | 20 | 40 | 105 |
| 19 | 20 | 45 | 110 |
| 20 | 20 | 45 | 110 |
| 22 | 20 | 45 | 110 |
| 24 | 25 | 50 | 120 |
| 25 | 25 | 50 | 120 |
| 26 | 25 | 50 | 120 |
| 28 | 25 | 55 | 125 |
| 30 | 25 | 55 | 125 |
| 32 | 32 | 60 | 145 |
| 35 | 32 | 60 | 145 |
| 36 | 32 | 60 | 145 |
| 38 | 32 | 65 | 150 |
| 40 | 32 | 65 | 150 |
| 45 | 32 | 70 | 160 |
KCT HSS-CO8 Roughing End mills are made from premium German Raw Material. Cobalt 8% Provides better wear resistance, higher hot hardness and toughness than high speed steel (HSS) end mills. There is very little chipping or microchipping under severe cutting conditions, allowing the tool to run 10% faster than HSS, resulting in excellent metal removal rates
KCT HSS-CO8 Roughing End mills is a cost-effective solution to realize fast feeding. KCT HSS-CO8 Roughing End mills are designed to remove large amounts of metal quickly and more efficiently. The Coarse tooth on KCT roughing end mills remove large chips for heavy cuts, deep slotting and rapid stock removal on low to medium carbon steel & alloy steel prior to a finishing application
- 8% Cobalt, fully CNC precision ground
- Available in 4 Flute
- All centre cutting, bright finish
- High quality- low cost tooling
- For machining carbon steel, alloy steels, tool steels
- Materials up to HRc35
Product attributes
HSS Co8
30° Angle
DIN 1835B End
